Blogs Archives | Page 17 of 20 | Technician.Academy

What Does It Mean To Be An ASE Master Technician?

Nov 18, 2016 | Blogs, Education, General Interest

ASE certification and the badge on the uniform signify that you have been tested and certified by the National Institute for Automotive Service Excellence. It implies to the public that you are knowledgeable in every aspect of the system you are working on. A...

Servicing Suspension Struts Requires Attention to Detail

Nov 14, 2016 | Blogs, Steering and Suspension

This article goes into great depth on some common and not so common suspension problem. It also deals with replacing just a strut on todays vehicles. Which can be a very dangerous job if not preformed properly. Many of todays vehicles have a complete strut and spring...

It’s Time to Look at Lower-Viscosity Oils for Fuel Savings

Nov 8, 2016 | Blogs, Shop Management

The value of using the correct lubricant is immeasurable. This article highlights some of the changes that are taking place in the medium and heavy duty category. “Earlier this year, the American Petroleum Institute approved the two new diesel engine oil...

Methods Employed to Remain Current in Today’s Automotive Environment

Nov 7, 2016 | Blogs, Education

Today’s automotive technician is a well-trained individual with a vast array of technical skills that are similar to those of a structural or electrical engineer due to the ever-changing technical aspects of the automobile. As in the computer industry, as soon as you...

The Hex of Body Flex

Nov 3, 2016 | Blogs, Body and Frame

Here’s a great article on eliminating noise created by an alignment pin of a Kia Optima.

Windshield Replacement Made Easy

Oct 27, 2016 | Blogs, Body and Frame, Windows and Glass

Replacing a windshield can be a bit tricky here is a tip that works. It is very simple to use and can speed up the process. “The “soapy string” trick — a classic to be sure. Modern windshields are held in place using very strong adhesive, but...